New Cast Iron

48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler

48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler
48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler
48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler
48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler
48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler

48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler
48kW Angus Max-05 Multi-Fuel and Wood Burning Cast Iron Boiler. Burns wood coal coke and peat This is a new multi-fuel wood burning cast iron boiler supplied by Eco Angus Ltd. These cast iron boilers are simple to operate and are an extremely cost effective way of gaining central heating and hot water.

They can be installed in to any open system and can burn all woods (including sawdust and chippings), coal, coke and peat. The Angus Max Cast Iron Boiler is a cost efficient way of gaining central heating and hot water. Made from corrosion resistant cast iron it is simple, but effective.

The Angus Max boiler is easy to control and has a large combustion chamber with easy access allowing the user to burn wood, coal, coke, briquettes and a variety of other solid fuels. It has high combustion performance, excellent corrosion resistance and comes equipped with its own ash pit and cleaning tools. It is simple to control the primary air flow with the thermo-mechanical regulator, the secondary air flow with the air rosette and you can control the chimney draught through the manual chimney flap. The thermo manometer indicates the temperature and pressure indicator. Fuel loading is easy and when fully loaded it will last typically between 4 to 8 hours.

It is possible to run over night on tick over by closing down the air supply through the regulation hatch, the air rosette and the manual chimney flap.. The opening/closing handles are covered with a rubber burning resistant material. The inlet/outlet on the back of the boilers are 2 female threads. In an open vented system the Angus Max will be primary vented on the hot water flow and secondary vented from the DHW cylinder. It is recommended that a thermo safety valve is fitted. In a pressurized system consideration should be given for an appropriately sized expansion vessel on the central heating circuit before the return to the boiler and a safety group on the primary flow. It is recommended that a heat exchanger with thermal safety valve is fitted. Please ensure you flush the system completely to avoid contamination on installation. Expected running costs are less then half of that of gas or oil. A table of the Angus Max Heating Area. SOLID FUEL BOILERS HEATOUTPUT AND MAX HEATING AREA (M2).

MAX HEATING AREA (UNC) (M2). For cold climate and low insulation houses, Max Heating Area should be decreased approximately 10%. For mild climate and strong insulation houses, Max Heating Area should be increased approximately 10%.

Operating instructions can be downloaded from the address below: Angus Max Instruction Manual (pdf file). Eco Angus Ltd are the sole UK contract distributor for EKO-VIMAR ORLANSKI. We supply wood burning boilers to the UK + Southern Ireland.

We offer a full after sales service through our network of installers. Find out more about your rights as a buyerand exceptions. Domestic dispatch time We regularly attend trade fairs across the UK where you can see our boilers and talk to an expert face to face. Visit our news page on the ecoangus website to find out where we'll be next. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Water Heaters\Standard Water Heaters". The seller is "ecoangus-2008" and is located in this country: GB. This item can be shipped to United Kingdom.
  • Type: Boilers: Regular
  • Brand: Eko-Vimar Olanksi
  • Sub-Type: Wood Multifuel
  • Finish: Grey

48kW Angus Max Multi Fuel Wood Burning Cast Iron Boiler