WEG W22 IE3 Cast Iron 2.2kW Three Phase Motor 230V/400V 4 Pole 100L Frame B3

WEG W22 Cast Iron Premium Efficiency (IE3) 2.2kW 4 Pole 3 phase AC Motor. 100L Frame, B3 Foot Mount with top mounted terminal box. Power: 2.2kW at 230V or 400V 50Hz. Torque: 14.6Nm at 50Hz.

Full Load Current with links in DELTA (230V 3ph): 7.93A Full Load Current with links in STAR (400V 3ph): 4.56A. Power Factor: 0.8 when mains connected at 50Hz. Efficiency: 87% (IE3) at 50Hz. For use with Variable Frequency Drives or a fixed frequency 400V three phase mains supply at 50Hz. AC Inverter Maximum Speed: 90Hz, 2583rpm. AC Inverter Minimum Speed: 5Hz, 143rpm.

Performance details of the motor with an AC Inverter are given in the datasheet below. Set terminal box links'three a-breast' for 230V'Delta' connection. Delta connection is required when using a single phase 230V AC Inverter. Set terminal box links'two at one side' for 400V'Star' connection.

Star connection is required when using a 400V three phase AC Inverter or when connected directly to a 400V three phase mains supply. IP55 TEFC (Totally Enclosed Fan Cooled) IC411. (Fan will rotate the same speed as the motor shaft) 206mm Wide x 376mm Long x 259mm High.

(Overall dimensions including shaft) Foot mount on 12mm holes with 160mm wide x 140mm centres 63mm back from shaft shoulder. Shaft: 28mm diameter x 60mm long. (Ventilation space required for air intake) Thermistors: Not Fitted Bearings: Ball Bearings. Type: 6206 ZZ(Drive End).

---